Honda BeAT Street 110 specifications

Overview

The published sheet lists a 109.5 cc engine, peak power of 6.6 kW (9.0 PS) / 7,500 rpm, peak torque of 9.2 N·m (0.94 kgf·m) / 6,000 rpm. It carries a curb weight of 89 kg, a 742 mm seat height and a 4.2 L tank.

On the published figures it works out to 7.4 kW per 100 kg, level with the median for the other 5 scooters in this database (7.2 kW per 100 kg).

Market and trim notes

This sheet covers the Honda BeAT Street 110 as listed in the Indonesian distributor’s current catalogue. Market-specific equipment can differ from the same nameplate in another country, so the figures are not interchangeable.

Full specification

Every row below is a published figure. Rows the manufacturer does not publish are marked rather than estimated.

What the numbers mean

The 742 mm seat is low enough that most riders can get both feet down at a stop.

At 89 kg it is light enough to push around a workshop or park by hand.

The 4.2 L tank is small, in keeping with a short-range commuter; expect regular fuel stops on longer rides. The manufacturer does not publish a consumption figure, so this page does not quote a range.

Tyres are 100/90 - 12 59J Tubeless front and 110/90 – 12 64J Tubeless rear. Check that your local shop stocks both before a long trip.

Closest alternatives

Nearest alternatives by category and capacity in this database. These are published figures, not a road test or a recommendation.

Ownership and maintenance notes

• The V-belt and rollers are the parts that change the feel of a CVT scooter. Inspect them at the interval in the owner's manual, and sooner if acceleration flattens or the engine revs without matching speed.
• Engine oil and the air filter do most of the work in keeping a small scooter consistent. Check the oil level cold, on level ground, and use the grade listed for the model.