Specification sheet — Kawasaki

Kawasaki Ninja ZX-6R specifications

The 636 cc inline-four supersport, with a 17 L tank and a 830 mm seat.

MarketIndonesia CategorySport SourceKawasaki Motor Indonesia
Kawasaki Ninja ZX-6R specification plate
Displacement
636 cc
Peak power
95.2 kW (129 PS) / 13,000 rpm (with Ram Air)
Peak torque
69.0 N·m (7.0 kgf·m) / 11,000 rpm
Curb weight
198 kg
Seat height
830 mm
Fuel tank
17 L

Overview

The published sheet lists a 636 cc engine, peak power of 95.2 kW (129 PS) / 13,000 rpm (with Ram Air), peak torque of 69.0 N·m (7.0 kgf·m) / 11,000 rpm. It carries a curb weight of 198 kg, an 830 mm seat height and a 17 L tank.

On the published figures it works out to 48.1 kW per 100 kg, above the median for the other 5 sport bikes in this database (19.6 kW per 100 kg).

Market and trim notes

This sheet covers the Kawasaki Ninja ZX-6R as listed in the Indonesian distributor’s current catalogue. Market-specific equipment can differ from the same nameplate in another country, so the figures are not interchangeable.

The power figure is quoted with ram-air; the source also lists a lower figure without it.

Full specification

Every row below is a published figure. Rows the manufacturer does not publish are marked rather than estimated.

Engine and performance

Engine typeLiquid-cooled, 4-stroke In-Line Four
Displacement636 cc
Bore × stroke67.0 x 45.1 mm
Compression ratio12.9:1
CoolingLiquid derived
Fuel systemFuel injection: ø38 mm x 4 with oval sub-throttles
Maximum power95.2 kW (129 PS) / 13,000 rpm (with Ram Air)
Maximum torque69.0 N·m (7.0 kgf·m) / 11,000 rpm
StartingElectric
IgnitionDigital

Transmission and final drive

Transmission6-speed, return
ClutchWet multi-disc, manual
Final driveChain

Chassis, suspension and brakes

FramePerimeter, pressed-aluminium
Front suspensionø41 mm inverted fork (SFF-BP) with rebound and compression damping and spring preload adjustability
Rear suspensionBottom-Link Uni Trak, gas-charged shock with piggyback reservoir, compression and rebound damping and spring preload adjustability
Front brakeDual semi-floating ø310 mm discs
Rear brakeø220 mm disc
Front tyre120/70ZR17M/C (58W)
Rear tyre180/55ZR17M/C (73W)

Dimensions, weight and capacity

Length × width × height2,025 x 710 x 1,105 mm
Wheelbase1,400 mm
Ground clearance130 mm
Seat height830 mm
Curb weight198 kg
Fuel tank17 L

What the numbers mean

The 830 mm seat is on the tall side for shorter riders, so try it before buying.

At 198 kg it is heavy: use the side stand deliberately and avoid loose surfaces at low speed.

The 17 L tank is touring-sized, which matters more on a bike that can sit at highway speed. The manufacturer does not publish a consumption figure, so this page does not quote a range.

Tyres are 120/70ZR17M/C (58W) front and 180/55ZR17M/C (73W) rear. Check that your local shop stocks both before a long trip.

Closest alternatives

ModelCapacityPowerTorqueWeightSeat
Kawasaki Ninja ZX-4RR399 cc56.7 kW (77 PS) / 14,500 rpm (with Ram Air)37.6 N·m (3.8 kgf·m) / 12,500 rpm189 kg800 mm
Kawasaki Ninja ZX-10R998 cc156.8 kW (213 PS) / 13,200 rpm with Ram Air114.9 N·m (11.7 kgf·m) / 11,400 rpm207 kg835 mm
Kawasaki Ninja ZX-25R249.8 cc35.2 kW (47 PS) / 15,500 rpm (with Ram Air)22.0 N·m (2.2 kgf·m) / 12,500 rpm180 kg785 mm

Nearest alternatives by category and capacity in this database. These are published figures, not a road test or a recommendation.

Ownership and maintenance notes

  • Clean and lubricate the chain at short intervals in rain or dust, and check slack with the bike on its side stand. A loose chain wears sprockets quickly; a tight one loads the output bearing.
  • Check tyre pressures cold. On a light bike a few psi matters more than it does on a car, and it changes both steering and tyre life.
  • Liquid cooling adds a coolant level and condition check. Do it when the engine is cold, and never open the radiator cap on a hot engine.
  • A high-specific-output engine rewards correct oil level and valve-clearance checks. Do not stretch the service interval because the bike feels fine.

Source and verification

Figures are taken from Kawasaki Motor Indonesia, the Indonesian distributor, on 13 November 2026.

Source page: kawasaki-motor.co.id/id-id/sepeda-motor/ninja/supersport/ninja-zx-6r/2026-ninja-zx-6r.

The source page is the 2026 model-year page.

Cooling is inferred from the published layout rather than printed as a separate field.

Wording is quoted as published; spacing and unit symbols are normalised. Specification databases go stale: if a figure here differs from the current distributor page, the distributor page wins, and this sheet records what was published on the verification date.