Specification sheet — Kawasaki
Kawasaki W800 specifications
The 773 cc air-cooled parallel-twin retro, with a 15 L tank and a 790 mm seat.
- Displacement
- 773 cc
- Peak power
- 38.0 kW (52 PS) / 6,500 rpm
- Peak torque
- 62.9 N·m (6.4 kgf·m) / 4,800 rpm
- Curb weight
- 226 kg
- Seat height
- 790 mm
- Fuel tank
- 15 L
Overview
The published sheet lists a 773 cc engine, peak power of 38.0 kW (52 PS) / 6,500 rpm, peak torque of 62.9 N·m (6.4 kgf·m) / 4,800 rpm. It carries a curb weight of 226 kg, a 790 mm seat height and a 15 L tank.
On the published figures it works out to 16.8 kW per 100 kg, above the median for the other 5 naked bikes in this database (10.8 kW per 100 kg).
Market and trim notes
This sheet covers the Kawasaki W800 as listed in the Indonesian distributor’s current catalogue. Market-specific equipment can differ from the same nameplate in another country, so the figures are not interchangeable.
Full specification
Every row below is a published figure. Rows the manufacturer does not publish are marked rather than estimated.
Engine and performance
| Engine type | Air-cooled, 4-stroke Vertical Twin |
|---|---|
| Displacement | 773 cc |
| Bore × stroke | 77.0 x 83.0 mm |
| Compression ratio | 8.4:1 |
| Cooling | Air derived |
| Fuel system | Fuel injection: ø34 mm x 2 with sub-throttles |
| Maximum power | 38.0 kW (52 PS) / 6,500 rpm |
| Maximum torque | 62.9 N·m (6.4 kgf·m) / 4,800 rpm |
| Starting | Electric |
| Ignition | Digital |
Transmission and final drive
| Transmission | 5-speed, return |
|---|---|
| Clutch | Wet multi-disc, manual |
| Final drive | Chain |
Chassis, suspension and brakes
| Frame | Double-cradle, high-tensile steel |
|---|---|
| Front suspension | ø41 mm telescopic fork |
| Rear suspension | Twin shocks with spring preload adjustability |
| Front brake | ø320 mm disc |
| Rear brake | ø270 mm disc |
| Front tyre | 100/90-19M/C 57H |
| Rear tyre | 130/80-18M/C 66H |
Dimensions, weight and capacity
| Length × width × height | 2,190 x 790 x 1,075 mm |
|---|---|
| Wheelbase | 1,465 mm |
| Ground clearance | 125 mm |
| Seat height | 790 mm |
| Curb weight | 226 kg |
| Fuel tank | 15 L |
What the numbers mean
The 790 mm seat is a middle-of-the-road height: most riders will get the balls of both feet down.
At 226 kg it is heavy: use the side stand deliberately and avoid loose surfaces at low speed.
The 15 L tank is touring-sized, which matters more on a bike that can sit at highway speed. The manufacturer does not publish a consumption figure, so this page does not quote a range.
Tyres are 100/90-19M/C 57H front and 130/80-18M/C 66H rear. Check that your local shop stocks both before a long trip.
Closest alternatives
| Model | Capacity | Power | Torque | Weight | Seat |
|---|---|---|---|---|---|
| Kawasaki Z900 | 948 cc | 92.2 kW (125 PS) / 9,500 rpm | 98.6 N·m (10.1 kgf·m) / 7,700 rpm | 213 kg | 810 mm |
| Kawasaki W175 | 177 cc | 9.6 kW (13 PS) / 7,500 rpm | 13.3 N·m (1.4 kgf·m) / 6,000 rpm | 135 kg | 785 mm |
| Kawasaki Z125 Pro | 125 cc | 6.9 kW (9.4 PS) / 7,500 rpm | 9.5 N·m (0.97 kgf·m) / 6,000 rpm | 101 kg | 780 mm |
Nearest alternatives by category and capacity in this database. These are published figures, not a road test or a recommendation.
Ownership and maintenance notes
- Clean and lubricate the chain at short intervals in rain or dust, and check slack with the bike on its side stand. A loose chain wears sprockets quickly; a tight one loads the output bearing.
- Check tyre pressures cold. On a light bike a few psi matters more than it does on a car, and it changes both steering and tyre life.
- Air-cooled engines rely on clean fins and a clear path for air. Wash the fins gently, and do not let mud or a loose cover block them in traffic.
Source and verification
Figures are taken from Kawasaki Motor Indonesia, the Indonesian distributor, on 13 November 2026.
Source page: kawasaki-motor.co.id/id-id/sepeda-motor/w/retro-classic/w800/2026-w800.
The source page is the 2026 model-year page.
Cooling is inferred from the published layout rather than printed as a separate field.
Wording is quoted as published; spacing and unit symbols are normalised. Specification databases go stale: if a figure here differs from the current distributor page, the distributor page wins, and this sheet records what was published on the verification date.
