Motorcycle boots are often sold on how they look: a thick sole, a plastic shin plate, a racing buckle. The standard that matters is less visible. CE EN 13634 defines tests for abrasion, cut resistance, impact protection and sole grip, and the boot's marking summarises the results in a compact code.

EN 13634 at a glance

Test areaWhat it assessesWhat it does not cover
Upper abrasionResistance to rubbingSeam strength in every direction
Cut resistanceResistance to sharp edgesCrush protection
Impact protectionEnergy absorption at the ankleTorsion or whole-foot protection
Sole gripFriction on a test surfaceEvery wet or oily road
MarkingStandard and performance codeFit or comfort

What EN 13634 covers

EN 13634 is the European standard for protective footwear for motorcycle riders. It includes tests for upper abrasion resistance, cut resistance, impact protection at the ankle and sole grip. It also covers the boot's construction and marking. It is not a single pass/fail label; different boots meet different performance levels.

The standard is used in the European Union and adopted in other markets. A boot sold as motorcycle protective footwear should carry the marking and the manufacturer's information. A tough-looking work boot without the marking may be durable, but it has not been assessed against the motorcycle standard.

Reading the performance code

The marking typically includes the standard number and a performance code. The code is often shown as two groups of digits, with the first group covering abrasion and cut resistance and the second covering impact protection and sole grip. The exact layout is defined by the standard, and manufacturers should explain it in the product information.

Higher numbers indicate higher performance in the relevant test. Do not assume that a boot with a high abrasion score also has high impact protection; the digits are independent. Ask the retailer or check the manual if the marking is not explained.

Impact protection and the ankle

The impact test assesses the boot's ability to absorb energy at the ankle. A boot with a higher impact rating has a protector that performed better in the test. That is not the same as covering the whole ankle or preventing torsion; the standard tests specific points and energies.

A boot can have excellent abrasion resistance and modest impact protection. For road riding, both matter: abrasion resistance keeps the upper intact in a slide, while impact protection reduces energy at the ankle. Read the whole code rather than looking for one headline number.

Sole grip and the limits of the test

The sole grip test measures friction on a defined surface under controlled conditions. It does not test every wet road, oil patch or metal footpeg. A boot that scores well in the test can still slip on a painted line or a smooth, wet surface.

Sole grip is also a trade-off with durability and peg feel. A soft compound may score well but wear quickly. A hard compound may last longer but offer less wet grip. The standard gives a comparison point, not a guarantee.

Other markets and national marks

Outside Europe, national standards and markings may apply. The United States does not have a single mandatory motorcycle boot standard comparable to EN 13634; products may be sold without it. Australia, Japan, Brazil and other markets have their own arrangements.

A boot that is legal and certified in one country may not carry the mark required in another. If you are buying across borders, check the local requirement rather than assuming that a CE mark is universal.

What the standard does not tell you

It does not tell you whether the boot fits, how hot it is, how well it walks, or whether the sole will suit your pegs. It does not test the boot against every real-world impact or surface. It does not replace abrasion-resistant trousers or a riding position that keeps your feet clear of the bike.

Use the standard to filter out boots that have not been assessed, then judge fit, comfort and construction. A certified boot that you wear is better than an uncertified boot that stays in the cupboard.

Checklist

  • Look for the EN 13634 marking on the boot or label.
  • Ask the retailer to explain the performance code.
  • Check impact protection separately from abrasion.
  • Confirm the standard required in your country.
  • Try the boot on and walk in it.
  • Replace boots with worn soles or damaged protectors.

Questions

Is EN 13634 mandatory?

It is the European standard for motorcycle protective footwear and is referenced in the EU PPE framework. Other markets have different rules. Check the requirement where you ride and buy.

Does a higher number always mean a better boot?

No. The digits cover different tests, and fit, comfort and construction also matter. A high score in one area does not guarantee performance in another.

Are work boots as good as motorcycle boots?

They may be tough, but they are not assessed against EN 13634 and may lack ankle protection, a secure fit and a sole designed for motorcycle use.

What does a CE mark on a boot mean?

It indicates that the product has been assessed under the applicable PPE regulation and standard. Read the accompanying marking and documentation; the CE mark alone does not describe the performance level.

Go deeper