Riding gear

Protective gear, judged by what it actually does.

Helmets, jackets, gloves, boots, rain layers and electronics, explained through certification, fit, materials and the limits of each piece, not through brand claims.

Guides100 Categories6 Updated14 November 2026

Riding gear is a system of compromises. A helmet that vents well in tropical heat may be louder; a jacket that keeps rain out may be heavy when the rain stops; armour that protects in a slide can restrict movement at walking pace. The useful question is not which product is best, but which compromise fits the ride you actually do.

This library separates three things that are often mixed together: what a standard actually tests, what a material can and cannot do, and what fit and maintenance change over time. It does not invent test results, prices, stock, or claims that a product prevents injury. Where a rule differs by country, the article names the jurisdiction instead of guessing.

100 guides

Line drawing comparing a full-face helmet shell with a modular helmet and its raised chin bar.Helmets

Helmets

Full-face vs modular helmets: what the flip chin bar changes

A modular helmet is not simply a full-face lid with a convenient hinge. The mechanism changes weight, balance, noise, sealing and the way the helmet is tested.

Read the guide
Line drawing of a full-face helmet beside an open-face helmet with a raised visor.Helmets

Helmets

Full-face vs open-face helmets: coverage is the whole argument

An open-face helmet can be certified and comfortable. It still leaves the face, chin and teeth outside the shell. That single fact should drive the decision.

Read the guide
Line drawing of a helmet label showing certification marks and a test anvil.Helmets

Helmets

Helmet certifications: what the label proves, and what it does not

A certification is a minimum test result, not a ranking of real-world protection. Reading the label correctly is more useful than arguing about brands.

Read the guide
Line drawing of a helmet on a test rig with impact points marked and an E-mark label on the shell.Helmets

Helmets

ECE 22.06: what the approval file actually tests

The regulation is a test protocol, not a quality ranking. Knowing what a batch of helmets goes through explains why two 22.06 lids can still feel completely different.

Read the guide
Line drawing of a helmet with a Snell label beside a test anvil and a headform.Helmets

Helmets

Snell M2020: an independent test, not a legal standard

Snell is voluntary, privately run and demanding in ways the law is not. That combination is useful and easy to misread.

Read the guide
Line drawing of helmet shell cross-sections showing a moulded thermoplastic shell and a layered composite shell.Helmets

Helmets

Helmet shell materials: what the outer layer is doing

The shell spreads an impact and holds the liner in place. Material choice changes how it does that, not whether the helmet is certified.

Read the guide
Line drawing comparing a moulded polycarbonate helmet shell with a layered fibreglass shell.Helmets

Helmets

Fibreglass vs polycarbonate: two shells, two behaviours

Both materials can pass the same standard and both can be made badly. The useful difference is how each shell responds to a hit and how it ages.

Read the guide
Line drawing of a carbon fibre helmet shell showing woven layers and a cut-away section through the laminate.Helmets

Helmets

Carbon fibre helmets: lighter, not automatically safer

Carbon lets a maker build a stiff shell with less material. It does not guarantee better protection, and the visible weave may be only the surface.

Read the guide
Line drawing of a helmet in section showing airflow paths from chin and brow intakes to rear exhaust vents.Helmets

Helmets

Helmet ventilation: where the air goes, and why vents disappoint

Counting vents tells you nothing. What matters is whether air can enter, cross your head and leave, and what else comes in with it.

Read the guide
Line drawing of a helmet with arrows showing turbulent airflow around the chin bar, visor edge and neck opening.Helmets

Helmets

Helmet noise: the sources you can change, and the ones you cannot

Most helmet noise is made by air moving around the helmet, not by the engine. That changes what is worth fixing.

Read the guide
Line drawing of four helmet visors: clear, tinted, mirrored and a helmet with an internal drop-down sun visor.Helmets

Helmets

Helmet visors: tint, optics and the law

A visor is a lens and part of the approved helmet. Changing it changes what you see, and sometimes what is legal.

Read the guide
Line drawing of a visor in section with a Pinlock insert held by two pins and a sealed air gap between the layers.Helmets

Helmets

Pinlock: a second surface, not a coating

The insert does not stop fog by chemistry alone. It traps a layer of dry air against the visor, and the seal is what makes that work.

Read the guide
Line drawing of a helmet visor with a fogged lower edge and an insert pinned inside.Helmets

Helmets

Helmet anti-fog: why the visor mists and which fix is worth it

A fogged visor is a physics problem, not a cleaning problem. The right fix depends on whether the mist forms on the visor, on your glasses, or on both.

Read the guide
Line drawing of a helmet with a tinted internal sun visor lowered behind the clear main visor.Helmets

Helmets

Helmet sun visors: a shade for daylight, not a spare visor

A drop-down sun visor is convenient and genuinely useful. It is also the part of the helmet most often misunderstood, especially at night and in tunnels.

Read the guide
Line drawing of a helmet chin strap with a double D-ring buckle and a ratchet buckle beside it.Helmets

Helmets

Helmet chin straps: the small part that keeps the helmet on

The shell and liner absorb the impact. The strap decides whether the helmet is still on your head when it happens.

Read the guide
Line drawing of a helmet on a balance scale with arrows showing mass at the chin bar and at the rear.Helmets

Helmets

Helmet weight: why the number on the box is not the whole story

Two helmets that weigh the same can feel completely different. Mass, balance and shell size do different jobs, and only one of them appears on the spec sheet.

Read the guide
Line drawing of a helmet cutaway showing glasses arms passing through channels in the cheek padding.Helmets

Helmets

Helmets for glasses wearers: the liner decides, not the visor

Most helmets can be worn with glasses. Few are comfortable with them for an hour. The difference is in the liner, the eye port and the space in front of your face.

Read the guide
Line drawing of a helmet with airflow arrows entering the chin vent and leaving the rear exhaust.Helmets

Helmets

Riding a helmet in hot weather without cooking your head

Heat inside a helmet comes from the sun, your own body and the engine below you. Ventilation helps only when air is moving, which is exactly when traffic stops.

Read the guide
Line drawing of a touring motorcycle with a rider in a full-face helmet and a tall screen.Helmets

Helmets

Touring helmets: what still feels fine at hour six

A helmet that is acceptable for a commute can be unbearable after four hours. Touring exposes the parts of the fit you did not notice in the shop.

Read the guide
Line drawing of a helmet cutaway showing a crushed foam liner beneath an intact outer shell.Helmets

Helmets

After an impact: how to tell whether a helmet is finished

The shell often looks fine. The liner that absorbed the energy does not recover, and it does not announce the damage.

Read the guide
Line drawing of a leather motorcycle jacket beside a textile jacket with a waterproof membrane callout.Jackets & body armour

Jackets & body armour

Textile or leather: the jacket choice that follows the ride

Leather wins arguments about abrasion. Textile wins rainy commutes. The honest answer depends on where and how often you ride, not on which material sounds tougher.

Read the guide
Line drawing of a mesh motorcycle jacket showing airflow arrows and solid panels at the shoulders and elbows.Jackets & body armour

Jackets & body armour

Mesh jackets: airflow is the point, abrasion is the catch

A mesh jacket can be the difference between riding and not riding in hot weather. It also has less material where you need it most, so the details matter.

Read the guide
Line drawing of an armoured motorcycle hoodie showing a cutaway abrasion lining and elbow armour pockets.Jackets & body armour

Jackets & body armour

Armoured hoodies look casual; the protection is in the details

A hoodie with elbow pockets is not automatically a riding garment. The difference between a useful armoured hoodie and a fashion item is the abrasion layer and the fit.

Read the guide
Line drawing of a rider wearing an airbag vest with inflated sections marked at the neck, chest, back and hips.Jackets & body armour

Jackets & body armour

Airbag vests: the extra layer that only works when fitted right

An airbag vest can cover areas a jacket cannot, but it needs room to inflate, a charged trigger and a rider who understands the reset.

Read the guide
Line drawing of a rider's back with a protector panel covering the spine from shoulders to waist.Jackets & body armour

Jackets & body armour

Back protectors: coverage and position matter more than the label

A back protector is only useful if it stays over the spine, covers the right length and fits inside the jacket without lifting.

Read the guide
Line drawing of a torso with a chest protector panel and shoulder straps.Jackets & body armour

Jackets & body armour

Chest protectors: a small panel with a difficult fit problem

Chest protection can reduce impact energy to the ribs and sternum, but only if the panel covers the right area and lets you breathe.

Read the guide
Line drawing of a jacket shoulder with an armour cup over the joint.Jackets & body armour

Jackets & body armour

Shoulder armour: the cup has to meet the joint

A hard shoulder cup looks protective, but it only works when it sits over the point of the shoulder through the full range of arm movement.

Read the guide
Line drawing of a bent arm with an elbow armour cup over the joint.Jackets & body armour

Jackets & body armour

Elbow armour: the joint that moves most

Elbow protection fails quietly when the sleeve twists or the armour pocket sits too low. The fit check takes less than a minute.

Read the guide
Line drawing of a bent leg with a knee protector over the kneecap.Jackets & body armour

Jackets & body armour

Knee protectors: the pad has to stay on the kneecap

Knee armour is easy to fit badly. The pad must cover the kneecap when the leg is bent on the bike, not just when you stand.

Read the guide
Line drawing of a pelvis with hip protector panels at the sides.Jackets & body armour

Jackets & body armour

Hip protectors: small panels, awkward placement

Hip armour sits where riders bend, sit and walk. If the pocket is wrong, the panel migrates or digs in, and it gets removed.

Read the guide
Line drawing of protective riding jeans with a cutaway showing the aramid lining and knee armour pocket.Jackets & body armour

Jackets & body armour

Protective jeans: what the denim is hiding

The outer cloth is the least important part. Lining coverage, seam construction and armour that stays over the joint decide what a pair of riding jeans can do.

Read the guide
Line drawing of textile motorcycle riding pants with knee armour and a jacket connection zip.Jackets & body armour

Jackets & body armour

Riding pants: the part of the kit riders skip

Most riders upgrade the jacket and forget the legs. Trousers carry the same armour logic, a bigger abrasion area and a fit problem that only appears when you sit down.

Read the guide
Line drawing of a rider wearing a long-sleeve base layer under an open motorcycle jacket.Jackets & body armour

Jackets & body armour

Base layers: the layer that decides whether the rest works

A base layer is not armour and does not pretend to be. Its job is to move sweat away from the skin and stop fabric bunching under the armour, in heat and in cold.

Read the guide
Line drawing of a motorcycle jacket panel sliding on asphalt with heat and fibre loss shown.Jackets & body armour

Jackets & body armour

Abrasion resistance: what happens when gear meets asphalt

A slide is a heat and material problem before it is a strength problem. Understanding how fabrics fail explains why seams, linings and coverage matter as much as the outer shell.

Read the guide
Line drawing of a motorcycle jacket label showing the EN 17092 class A, AA or AAA and armour marking.Jackets & body armour

Jackets & body armour

CE A, AA and AAA: what the rating actually tells you

The class is a property of the garment, not of the armour inside it. Higher is more demanding in the test, but not automatically better for every ride or climate.

Read the guide
Line drawing comparing a thin Level 1 shoulder pad with a thicker Level 2 pad inside a jacket pocket.Jackets & body armour

Jackets & body armour

Armour levels: what Level 1 and Level 2 really compare

Level 2 absorbs more energy in a laboratory test. Whether it protects you better depends on whether the pad stays over the joint and whether you will wear it in the heat.

Read the guide
Line drawing of a motorcycle jacket showing intake vents on the chest and exhaust vents on the back.Jackets & body armour

Jackets & body armour

Jacket ventilation: why more vents are not always more air

Airflow needs a path in and a path out. A jacket with six vents and a waterproof liner can be hotter than a simple mesh shell with one good opening.

Read the guide
Line drawing of a jacket cross-section showing an outer shell, waterproof membrane and inner liner.Jackets & body armour

Jackets & body armour

Waterproof membranes: what keeps rain out, and what keeps you dry

A membrane stops liquid water while letting vapour through, but only if the seams, zips and surface finish cooperate. The construction matters more than the name.

Read the guide
Line drawing of a commuter in a textile jacket, protective jeans, gloves and a helmet beside a city motorcycle.Jackets & body armour

Jackets & body armour

Commuting gear: built for the trip you repeat every day

The commute is short, slow and frequent. That changes the trade-offs: heat, time to dress and what you can wear at the destination matter as much as the abrasion class.

Read the guide
Line drawing of a touring motorcycle with a rider in layered textile gear and luggage.Jackets & body armour

Jackets & body armour

Touring gear: a system for weather you cannot predict

A tour crosses climates in a day. The kit has to be adjustable, repairable and comfortable enough that you keep wearing it after the fifth hour.

Read the guide
Line drawing comparing a short-cuff motorcycle glove with a long gauntlet glove over a jacket sleeve.Gloves & boots

Gloves & boots

Short vs gauntlet gloves: the cuff decides more than the style

Cuff length changes how much wrist is covered, where rain gets in, and how the glove meets your jacket. It is a fit decision before it is a fashion one.

Read the guide
Line drawing of a leather motorcycle glove beside a mesh textile glove with a reinforced palm.Gloves & boots

Gloves & boots

Leather vs textile gloves: the material is only half the story

Leather resists abrasion and moulds to the hand. Textile dries fast and breathes. The right choice depends on which weakness your riding exposes.

Read the guide
Line drawing of a motorcycle glove knuckle guard in hard shell, soft armour and hybrid forms.Gloves & boots

Gloves & boots

Knuckle protection: what the guard does between your hand and the road

A knuckle guard spreads a local impact and gives the hand a surface to slide on. It is one part of the glove, not a verdict on the whole glove.

Read the guide
Line drawing of a motorcycle glove palm showing a hard slider at the heel of the hand and thumb base.Gloves & boots

Gloves & boots

Palm sliders: the small patch that changes how your hand meets the road

Knuckles get the attention, but the palm often hits first and slides. A slider is a low-friction surface placed where the hand actually loads.

Read the guide
Line drawing of a glove fingertip with a conductive patch touching a phone screen on a handlebar mount.Gloves & boots

Gloves & boots

Touchscreen gloves: a conductive patch, and the compromises behind it

A touchscreen glove is a normal riding glove with conductive material at the fingertip. The patch has to survive sweat, rain, washing and grip friction.

Read the guide
Line drawing of a mesh motorcycle glove with a ventilated back and reinforced leather palm.Gloves & boots

Gloves & boots

Gloves for hot weather: airflow you will use, protection you keep

The best hot-weather glove is the one you keep wearing. Heat changes behaviour, so the goal is airflow without stripping the palm and knuckles.

Read the guide
Line drawing of a gauntlet rain glove with a sealed cuff over a jacket sleeve and water beading on the surface.Gloves & boots

Gloves & boots

Rain gloves: the membrane matters, but the cuff decides

Waterproof gloves often fail at the wrist. Rain runs down the sleeve, collects at the closure and finds the first gap.

Read the guide
Line drawing of a touring glove with a long adjustable cuff, flat palm seams and a spare pair beside it.Gloves & boots

Gloves & boots

Long-distance gloves: comfort is what keeps the protection on

A glove that feels fine in the shop can be unbearable after four hours. The difference is pressure points, seams and a cuff that works with your layers.

Read the guide
Line drawing of a glove label showing the CE EN 13594 marking, a knuckle level and a test rig.Gloves & boots

Gloves & boots

Glove standards: what CE EN 13594 tests, and what it does not

The level number is not a general quality score. It describes knuckle performance, while the rest of the standard covers very different failures.

Read the guide
Line drawing of glove cuffs showing hook-and-loop, ratchet and elastic closures on short and long cuffs.Gloves & boots

Gloves & boots

Glove cuff design: the closure is the part that keeps the glove on

Cuff shape and closure decide whether the glove stays put in a pull, seals against rain and can be fastened with cold hands.

Read the guide
Line drawing of a motorcycle boot beside a low trainer, with the ankle and sole areas marked.Gloves & boots

Gloves & boots

Motorcycle boots vs regular shoes: the difference is where it counts

A regular shoe is built to walk and flex. A motorcycle boot is built to keep a foot together against a peg, a lever and moving road surface.

Read the guide
Line drawing of a short motorcycle commuter boot with a side zip and a reinforced shift pad.Gloves & boots

Gloves & boots

Commuter boots: the case for a short boot you will actually wear

The best commuter boot is not the tallest or the toughest. It is the one that covers the ankle, survives the lever and still lets you walk indoors.

Read the guide
Line drawing of a tall touring motorcycle boot with adjustable calf straps and a lugged sole.Gloves & boots

Gloves & boots

Touring boots: designed for the eighth hour, not the first

A touring boot has to stay comfortable after the weather changes twice, the socks are damp and there are still two hours to the hotel.

Read the guide
Line drawing of a tall adventure motorcycle boot with three buckles and a deep-lug sole.Gloves & boots

Gloves & boots

Adventure boots: the compromises start where the tarmac ends

An adventure boot is a trail boot that has to behave on the road. The design fights between feel, protection and the ability to walk over rocks.

Read the guide
Line drawing of a racing motorcycle boot showing toe slider, ankle hinge and ratchet buckles.Gloves & boots

Gloves & boots

Racing boots are built for the peg, not the pavement

A race boot trades walking comfort for control at lean angle. The sliders, the hinge and the stiff sole all keep the foot on the peg and out of the way.

Read the guide
Line drawing of a motorcycle boot with ankle discs and a reinforced sole.Gloves & boots

Gloves & boots

Ankle protection: height, armour and the torsion problem

Ankle injuries are common in motorcycle falls. A stiff sole and a tall boot help, but the ankle needs more than foam padding.

Read the guide
Line drawing of a motorcycle boot sole with a tread pattern and heel block.Gloves & boots

Gloves & boots

Boot sole grip: two surfaces, two different jobs

A boot sole has to grip the road when you stop and the peg when you ride. Those jobs want different things.

Read the guide
Line drawing of a motorcycle boot showing a waterproof membrane layer and sealed seams.Gloves & boots

Gloves & boots

Waterproof boots: the membrane is only part of the answer

Waterproof boots keep water out until the construction, seams or care let it in. Breathability and heat are the price.

Read the guide
Line drawing of a boot label showing the EN 13634 performance code.Gloves & boots

Gloves & boots

Boot standards: what the EN 13634 code tells you

A boot label is not a single pass mark. It is a short code describing several different tests, and each digit answers a different question.

Read the guide
Line drawing of a boot toe with a reinforced shift pad against a gear lever.Gloves & boots

Gloves & boots

Shift pad protection: the small wear point that ends boots

The shift lever rubs the same spot thousands of times. A shift pad spreads that wear and protects the boot's structure.

Read the guide
Line drawing of a rider wearing a two-piece rain suit over armoured riding gear.Rain & weather gear

Rain & weather gear

Motorcycle rain suits: a shell that has to fit over everything else

A rain suit is the least glamorous piece of kit and the one most often bought badly. The fabric is only half the story; seams, closures and fit decide the rest.

Read the guide
Line drawing comparing a one-piece rain suit with a two-piece rain jacket and trousers.Rain & weather gear

Rain & weather gear

One-piece vs two-piece rain gear: the waist decides it

A one-piece suit keeps water out of the small of your back. A two-piece lets you keep the jacket on when the rain stops. Neither wins everywhere.

Read the guide
Line drawing of a rain jacket showing the collar, storm flap, cuffs and hem.Rain & weather gear

Rain & weather gear

Rain jacket features: the details that decide whether you stay dry

Most rain jackets look similar in a shop. The differences show up at speed in a downpour, at the collar, the cuffs and the front zip.

Read the guide
Line drawing of waterproof overpants with a high waist, articulated knees and boot overlap.Rain & weather gear

Rain & weather gear

Waterproof overpants: fit is the whole specification

Overpants fail at the waist, the crotch and the boot top. All three are fit problems before they are fabric problems.

Read the guide
Line drawing of a rain boot cover over a motorcycle boot, showing the sole opening and shifter patch.Rain & weather gear

Rain & weather gear

Rain boot covers: cheap, effective and easy to get wrong

A pair of overboots can keep your feet dry for the price of a tank of fuel. The sole and the top seal decide whether they work.

Read the guide
Line drawing of a waterproof overglove on a handlebar grip and brake lever.Rain & weather gear

Rain & weather gear

Waterproof glove covers: what you trade for dry hands

Covers are the cheapest way to finish a wet ride with dry hands. They also blunt feel at the levers, which is the part worth thinking about.

Read the guide
Line drawing of a rider's neck gaiter tucked under a helmet and jacket collar.Rain & weather gear

Rain & weather gear

Neck gaiters: the smallest piece that changes a cold or wet ride

A gaiter closes the gap between helmet and jacket. Get the material and the tuck right and the whole ride feels warmer and drier.

Read the guide
Line drawing of a balaclava with a face opening, flat seams and a neck skirt.Rain & weather gear

Rain & weather gear

Balaclavas: warmth, hygiene and the fogging trade-off

A balaclava is a liner, not a scarf. Under a helmet, thickness and seam placement matter more than the fabric's marketing.

Read the guide
Line drawing of a rider wearing a cooling vest under a mesh motorcycle jacket with airflow arrows.Rain & weather gear

Rain & weather gear

Cooling vests: the humidity decides whether they work

A cooling vest is not air conditioning. It moves heat in one direction, and the weather can stop it working completely.

Read the guide
Line drawing of a rider wearing a hydration backpack with a drink tube routed toward the helmet.Rain & weather gear

Rain & weather gear

Hydration packs: drinking water is part of the kit

Dehydration degrades attention before you feel thirsty. A bladder and tube solve the delivery problem, not the physiology.

Read the guide
Line drawing of a rider showing exposed neck, wrists and face next to a UV-blocking layer.Rain & weather gear

Rain & weather gear

Sun protection on a motorcycle is a coverage problem

Mesh keeps you cool and lets sunlight reach your skin. The fix is more coverage in specific places, not a heavier jacket everywhere.

Read the guide
Line drawing of a rider at night with headlights returning light from a reflective vest.Rain & weather gear

Rain & weather gear

Reflective vests: brightness is conditional

A vest only works in the conditions it was designed for. Fluorescence and retroreflection are different tools, and neither replaces road position and lights.

Read the guide
Line drawing of a rider in mesh gear with a packable rain shell, storm clouds and sun.Rain & weather gear

Rain & weather gear

Gear for tropical riding: heat, rain and sun in one day

Tropical weather does not choose one problem at a time. The kit has to handle a hot morning, a flooded afternoon and a dark, wet ride home.

Read the guide
Line drawing of layered motorcycle clothing with wind arrows deflected by an outer shell.Rain & weather gear

Rain & weather gear

Cold-weather gear: stop the wind before adding insulation

Most cold-ride discomfort is airflow, not lack of padding. Fix the wind and the layers do far more.

Read the guide
Line drawing of a rider with humidity droplets and airflow moving through a mesh jacket.Rain & weather gear

Rain & weather gear

Humid-weather gear: managing sweat, not just heat

In humid air, sweat cannot evaporate, so cooling stalls. The kit has to move moisture and let air pass, and no membrane can fix saturation.

Read the guide
Line drawing of a cloth tape measure around a head at brow level, with a size chart beside it.Gear fit & care

Gear fit & care

Measure your head once, correctly, then choose the size

Sizing is a measurement task: one circumference, taken the same way every time, then matched to a brand's chart. Fit is a separate check that comes after.

Read the guide
Line drawing of hands rolling a helmet forward on a rider's head and lifting the rear rim.Gear fit & care

Gear fit & care

A helmet fits when it stays put, not when it feels snug

A helmet can match your measured size and still fit badly. These tests show where it presses, whether it stays on, and when to change size, pads or model.

Read the guide
Line drawing of a hand with a tape around the knuckles and a second measure from wrist to middle fingertip.Gear fit & care

Gear fit & care

Glove size starts with two measurements, not one

A single letter on the label hides the two numbers that matter. Measure the palm and the fingers, then test the glove where it is used: on the bars.

Read the guide
Line drawing of a rider in a motorcycle jacket with shoulder and elbow armour marked, arms reaching forward.Gear fit & care

Gear fit & care

A jacket fits when the armour stays over the joint

Shoulder seams and chest measurements are only the start. The jacket has to keep armour in place, stay down at the waist and work in the riding position.

Read the guide
Line drawing of a motorcycle boot with markings at the heel, ankle armour and toe box.Gear fit & care

Gear fit & care

Boot fit is decided at the heel and the ankle

A boot can feel fine in the shop and still fail on the peg. Measure both feet, check that the heel stays down and the armour sits on the bone.

Read the guide
Line drawing of a seated rider showing knee armour, hip armour and the hem over a boot.Gear fit & care

Gear fit & care

Riding pants fit sitting down, not standing up

The mirror test hides the real problem. Knee armour, rise and hem have to work with your knees bent and your feet on the pegs.

Read the guide
Line drawing of helmet cheek pads and crown liner laid flat to dry beside an open helmet shell.Gear fit & care

Gear fit & care

Clean the liner by hand, and only as far as the manual allows

Helmet liners are easy to wash and easy to ruin. Find out what releases, use cool water and mild soap, and dry the pads completely before refitting.

Read the guide
Line drawing of a helmet visor being rinsed under water with a microfiber cloth beside it.Gear fit & care

Gear fit & care

Water first, cloth second, and never a dry wipe

Most visor damage comes from cleaning, not from the road. Rinse off grit, soften bugs, wipe with a clean microfiber cloth and leave the coatings alone.

Read the guide
Line drawing of a leather motorcycle jacket being wiped with a cloth, with callouts on the elbow seam and armour pocket.Gear fit & care

Gear fit & care

How to clean a leather motorcycle jacket without ruining the hide

Leather responds badly to too much water, too much heat and the wrong chemistry. Cleaning it well is mostly a matter of doing less, more carefully.

Read the guide
Line drawing of a textile motorcycle jacket on a hanger with a care label, laundry bag and armour inserts beside it.Gear fit & care

Gear fit & care

How to wash textile motorcycle gear without wrecking the membrane

Textile gear is washable, but it is not ordinary laundry. Heat, softener and a fast spin do more damage than road dirt ever will.

Read the guide
Line drawing of a waterproof motorcycle jacket with water beading on the shoulder and callouts at the seam tape and cuff.Gear fit & care

Gear fit & care

Keeping waterproof motorcycle gear waterproof

A leak is usually a worn surface finish or a tired closure, not a ruined membrane. Diagnose before you re-proof or replace.

Read the guide
Line drawing of a motorcycle helmet resting on a shelf inside a breathable cotton bag, with a visor and gloves nearby.Gear fit & care

Gear fit & care

How to store a motorcycle helmet so it stays safe

A helmet spends most of its life off the bike. Heat, damp and the weight of the helmet itself are working on it the whole time.

Read the guide
Line drawing of a leather jacket on a wide hanger, gloves laid flat and boots standing upright with trees inside.Gear fit & care

Gear fit & care

How to store motorcycle gear so it is ready when you are

Most gear is stored in a hurry. The damage that follows is slow, quiet and entirely avoidable.

Read the guide
Line drawing of a worn motorcycle glove showing a thinning palm, a scuffed slider and a frayed thumb seam.Gear fit & care

Gear fit & care

When motorcycle gloves have done their job and need replacing

Gloves wear out from the palm outward. The certificate describes a new glove, not the pair you are wearing now.

Read the guide
Line drawing of a motorcycle boot with callouts at the worn sole, shift pad, ankle cup and zip.Gear fit & care

Gear fit & care

When motorcycle boots are worn out, not just scuffed

Boots fail from the sole up and from the zip in. A tidy upper can hide a sole that no longer grips or an ankle that no longer holds.

Read the guide
Line drawing of a helmet with an intercom unit clamped to the shell, a speaker inside the ear recess and a boom microphone.Rider accessories & electronics

Rider accessories & electronics

Helmet intercoms: the hardware decides whether you use it

The radio is the easy part. Mounts, speakers and microphones decide whether an intercom fits your helmet, sounds acceptable and survives daily use.

Read the guide
Line drawing of a helmet headset paired to a phone, a navigation unit and a second rider's headset.Rider accessories & electronics

Rider accessories & electronics

Bluetooth on a motorcycle: what pairing actually connects

Most connection problems are not radio failures. They are profile limits, pairing order and two devices competing for the same headset.

Read the guide
Line drawing of three earplug types beside a helmet, with a filtered plug shown in cross-section.Rider accessories & electronics

Rider accessories & electronics

Earplugs for riding: quieter without going deaf to the road

Wind noise is the loudest part of most rides and the easiest to ignore. The right plug cuts the roar without cutting the traffic.

Read the guide
Line drawing of a helmet with an adhesive camera mount and a tether, beside a handlebar clamp mount.Rider accessories & electronics

Rider accessories & electronics

Mounting an action camera without weakening your helmet

The best angle is worthless if the mount adds a hard point to your helmet or hides a crack in the shell. Choose the attachment before the shot.

Read the guide
Line drawing of a motorcycle handlebar with a navigation unit, a phone mount and a cable routed to a fused power supply.Rider accessories & electronics

Rider accessories & electronics

Navigation on a motorcycle: keep your eyes on the road

A screen is only useful if you can read it with a glance. Mounting, power and weather decide whether navigation helps or distracts.

Read the guide
Line drawing of a motorcycle helmet with a head-up display, a built-in camera and a speaker recess shown in cutaway.Rider accessories & electronics

Rider accessories & electronics

Smart helmets: separating the shipped product from the show stand

A helmet with a built-in display and a helmet with a bracket for a Bluetooth unit are sold under the same word. They are not the same risk, and they do not age the same way.

Read the guide
Line drawing of a helmet with a small camera module and a recording indicator.Rider accessories & electronics

Rider accessories & electronics

Helmet cameras: the recording is the easy part

A camera that runs out of power, overwrites the clip or mounts badly is not evidence. Reliability is the feature that matters.

Read the guide
Line drawing of a riding jacket with an ID card in the chest pocket, a metal tag and a phone showing a medical ID screen.Rider accessories & electronics

Rider accessories & electronics

Emergency ID: making yourself findable when you cannot speak

First responders look in predictable places. A card in the jacket, a tag on the wrist and an unlocked medical ID on the phone each cover a different failure.

Read the guide
Line drawing of a rider with reflective strips on a jacket, a fluorescent vest and a rear LED light.Rider accessories & electronics

Rider accessories & electronics

Reflective accessories: three different jobs, often confused

Retroreflection, fluorescence and active lighting solve different problems. Buying one and expecting the others is how riders end up visible in the wrong conditions.

Read the guide
Line drawing of an ear with sound waves and a protective plug.Rider accessories & electronics

Rider accessories & electronics

Hearing protection: the damage is slow, then permanent

Wind noise does not feel dangerous because it does not hurt. The hearing loss it causes accumulates quietly and cannot be reversed.

Read the guide