A load index is a code, not a weight. Each number maps to a maximum load in kilograms under the standard table used by tire manufacturers. On a motorcycle the figure applies per tire, and it assumes the tire is inflated to the pressure specified for that load. A bike with a 54-index rear tire is not approved to carry 212 kg on that tire at any pressure you like; it is approved up to that load at the correct pressure and in the correct fitment. Add a passenger, luggage and a top box and the margin can disappear quickly.
Common load index values
| Index | Load per tire (kg) | Typical use |
|---|---|---|
| 45 | 165 | Small commuter |
| 50 | 190 | Light scooter |
| 54 | 212 | Underbone, small bike |
| 58 | 236 | 250-400 cc commuter |
| 62 | 265 | Mid-size road bike |
| 66 | 300 | Sport tourer |
| 73 | 365 | Heavy tourer, adventure |
| 80 | 450 | Large touring, loaded |
Reading the table
The load index table is standardised. Some common motorcycle values: 45 = 165 kg, 48 = 180 kg, 50 = 190 kg, 52 = 200 kg, 54 = 212 kg, 56 = 224 kg, 58 = 236 kg, 60 = 250 kg, 62 = 265 kg, 64 = 280 kg, 66 = 300 kg, 68 = 315 kg, 70 = 335 kg, 72 = 355 kg, 73 = 365 kg, 75 = 387 kg, 77 = 412 kg, 80 = 450 kg.
The table is per tire, in single fitment. If a tire is used in a dual or tandem fitment, a different table applies and the allowable load is lower. Motorcycles almost always use the single-fitment figure, but trailers and some trikes do not. Check the standard the tire is marked against if the fitment is unusual.
Axle load, not bike weight
The load on a tire is the share of the total weight carried by that axle, plus the rider, passenger, luggage and any towed load. Static distribution changes when you sit on the bike, and dynamic load changes under braking, acceleration and bumps. A rear tire can see a large transfer under acceleration and a front tire can see a large transfer under braking.
Use the vehicle plate's gross vehicle weight and the manufacturer's load figures where they are given. If you are adding a passenger and luggage, compare the total with the sum of the two tire limits, not with the bike's dry weight. A tire that is legal solo can be overloaded two-up with a full top box.
Pressure is part of the rating
The load index assumes a pressure. Under-inflation increases sidewall deflection and heat, and the tire can fail below its rated load. Over-inflation reduces the contact patch and can make the tire more susceptible to impact damage, even though it carries the load with less deflection.
This is why a heavier load usually calls for a higher pressure, not a different tire. The vehicle manual often gives solo and two-up figures. Use them cold. Do not use the sidewall maximum as a target; it is a ceiling for the tire, not a recommendation for the bike.
Why a higher index is not automatically better
A tire with a much higher load index has a stronger casing. That can be useful on a heavy tourer, but on a light bike it can make the ride harsh and reduce the way the tire conforms to the road. The contact patch may be less able to follow small bumps, which is a grip and comfort trade.
The right index is the one the vehicle was designed around, or the next step up if you regularly carry a load and the manual allows it. Fitting a much higher-rated tire to gain 'strength' can change handling without any corresponding benefit.
Checking a fitted tire
Read the sidewall index, then read the vehicle plate. If the tire index is lower than the plate requires, the tire is not approved regardless of how it feels. If it is higher, confirm the size and construction are also approved. Then set the cold pressure for the load you will actually carry.
Check both tires. A previous owner may have fitted a correct front and an incorrect rear, or a pair from different categories. The sidewall is the only reliable record once the original invoice is gone.
Checklist
- Read the load index on both sidewalls.
- Compare it with the minimum on the vehicle plate or manual.
- Add rider, passenger, luggage and accessories when estimating load.
- Use the solo and two-up cold pressures from the manual.
- Do not bleed a hot tire down to the cold figure.
- Replace a tire that has been run significantly overloaded or under-inflated.
Questions
Does a higher load index mean a stronger tire?
It means the tire is rated to carry more load at the specified pressure. The casing is usually reinforced, but strength under impact, cut resistance and grip are separate properties. A higher index is not a universal upgrade.
What happens if I exceed the load index?
The casing is over-deflected, heat rises and the risk of failure increases. Handling also deteriorates. The tire may not fail immediately, but it is outside its approved duty and should not be used that way.
Is the load index per tire or per axle?
Per tire in single fitment. For a motorcycle, check each tire against its share of the loaded weight. Do not add the two indexes and treat the sum as an axle rating without checking the standard.
Can I use a lower index if I keep the pressure high?
No. The index is a structural rating, not a pressure setting. Higher pressure does not raise the approved load, and it can reduce the contact patch.