Tires & wheels

Tires and wheels, read from the contact patch up.

Construction, sizing, grip, wear patterns, rims, maintenance and replacement, explained by what the rubber and the rim actually do — not by claims copied from a catalogue.

Guides90 Categories10 Updated15 November 2026

A motorcycle tire is a structural part, not a consumable accessory. It carries the load, generates the grip, absorbs part of the road, and is the only thing between the rim and the surface. Most tire advice fails because it starts with a product instead of a mechanism: what the casing does under load, what the compound can hold at temperature, what a wear pattern says about pressure and suspension.

This library works in ten families, from construction and sizing through diagnosis, brands, rims, storage and replacement. Every guide states the mechanism, the inspection you can do yourself, and the point where a professional should take over. It does not invent test results, prices, stock, fitment tables or brand rankings, and it does not claim that a tire can make an unsafe bike safe.

Where a rule depends on the machine, the load or the jurisdiction, the guide names the dependency instead of guessing. Use the manufacturer's cold pressure figure for your bike as the starting point; use the guide to understand why that figure changes with load, heat and use.

90 guides

01 Construction

Tire construction & technology

Radial and bias casings, compounds, tread patterns, sidewall marks, load and speed ratings.

20 guides

Technical line drawing of a tire with a cutaway wedge showing tread, belt, carcass and bead layers.Tire construction & technology

Tire construction & technology

Radial vs bias-ply motorcycle tires: what the casing changes

The difference is not a spec-sheet line. Cord angle decides how the sidewall flexes, how the tread stays flat under load, and how much heat the tire has to shed.

Read the guide
Technical line drawing of a tire with a cutaway wedge and a label panel showing size and load markings.Tire construction & technology

Tire construction & technology

Motorcycle tire compounds: what the rubber can and cannot do

A compound is a compromise between grip, wear and heat. The trade-off is set by the rubber, the fillers and the way the tire is built, not by a marketing grade.

Read the guide
Technical line drawing of a knobbly adventure tire with tread blocks around the circumference.Tire construction & technology

Tire construction & technology

Motorcycle tire tread patterns: grooves are a water channel, not decoration

A tread pattern moves water, stabilises the contact patch and changes how the tire wears. Reading the grooves tells you what surface the tire was drawn for.

Read the guide
Technical line drawing of a tire beside a label panel showing size, load and speed markings.Tire construction & technology

Tire construction & technology

Motorcycle tire sidewall markings: how to read the whole sidewall

The sidewall is the tire's label, its approval record and its date stamp. Read it in the right order and most fitment questions answer themselves.

Read the guide
Technical line drawing of a wheel with a dimension line and a label panel showing load and speed markings.Tire construction & technology

Tire construction & technology

Motorcycle tire load index: the number is a ceiling, not a suggestion

The load index maps to a maximum load per tire at a specified pressure. Exceed it and the casing, not the tread, is what fails.

Read the guide
Technical line drawing of a wheel with a dimension line and a label panel showing the speed symbol.Tire construction & technology

Tire construction & technology

Motorcycle tire speed rating: a test condition, not a target

The letter after the load index is a maximum speed under a defined test. It does not raise the speed limit of the bike, the road or the rider.

Read the guide
Technical line drawing of a tire beside a label panel showing date and approval markings.Tire construction & technology

Tire construction & technology

Motorcycle tire date codes: production week, not an expiry date

The four digits after the DOT code tell you when the tire was moulded. They do not tell you how it was stored or how much life is left.

Read the guide
Technical line drawing of a worn tire with a tread-depth scale and wear markers.Tire construction & technology

Tire construction & technology

Motorcycle tire tread depth: the indicator is a limit, not a target

Depth clears water and stabilises the tread. Once the indicator is reached, the tire has already lost most of its wet margin.

Read the guide
Technical line drawing of a tire cross-section with casing layers and bead detail.Tire construction & technology

Tire construction & technology

Motorcycle tire carcass construction: the part you never see

The carcass carries the load, holds the shape and defines how the tire flexes. Tread is the wear surface; the carcass is the structure.

Read the guide
Technical line drawing of a wheel rim with a marked bead seat and valve.Tire construction & technology

Tire construction & technology

Motorcycle tire bead: the joint that holds the air in

The bead does two jobs at once: it anchors the casing to the rim and, on a tubeless tire, it seals the air chamber. Damage to either job is a replacement.

Read the guide
Technical line drawing of a tire with a cutaway wedge and a label panel showing compound markings.Tire construction & technology

Tire construction & technology

Silica compounds: why wet grip and rolling resistance move together

Silica changes how rubber interacts with water and with the road. It is a tool for a trade-off, not a guarantee of wet safety.

Read the guide
Technical line drawing of a tire with a cutaway wedge showing tread, belt and carcass layers.Tire construction & technology

Tire construction & technology

Dual-compound tires: two rubbers, one compromise

A harder centre and a softer shoulder let a tire wear like a commuter and grip like a sport tire at lean. The seam between them is the interesting part.

Read the guide
Technical line drawing of a wheel rim with a marked bead seat and valve.Tire construction & technology

Tire construction & technology

Tubeless tires: the air is held by the assembly, not the rubber alone

A tubeless tire has no tube to pinch, but it depends on a sealed liner, a clean bead and a rim designed for it.

Read the guide
Technical line drawing of a wheel with a tube and rim strip visible in section.Tire construction & technology

Tire construction & technology

Tube-type tires: simple, repairable and heat-sensitive

A tube lets a spoked rim hold air without a sealed rim. It also adds a component that can pinch, chafe and heat.

Read the guide
Technical line drawing of a directional tire with an arrow marking on the sidewall.Tire construction & technology

Tire construction & technology

Directional arrows: the tire is designed to turn one way

The arrow is not a suggestion. It sets water flow, tread block loading and the wear pattern for the life of the tire.

Read the guide
Technical line drawing of a tire cross-section with belt and carcass layers labelled.Tire construction & technology

Tire construction & technology

Tire belts: the layer that keeps the tread flat

A belt spreads load and controls tread distortion. When it breaks, the tire can still hold air and still be finished.

Read the guide
Technical line drawing of a tire with a marked contact patch and load arrows.Tire construction & technology

Tire construction & technology

The contact patch: small, changing and not the whole story

The patch is where force is transferred, but its size is less important than how evenly it is loaded and how the rubber conforms.

Read the guide
Technical line drawing of a tire sidewall flexing under load with arrows.Tire construction & technology

Tire construction & technology

Sidewall stiffness: the spring you never adjust

The sidewall is a spring in series with the suspension. Its stiffness sets ride comfort, heat and how the contact patch follows the road.

Read the guide
Technical line drawing of a tire with a temperature scale and heat arrows.Tire construction & technology

Tire construction & technology

Heat cycles: what repeated warming does to rubber

A tire is designed to work in a temperature window. Repeated heating and cooling changes the rubber, and overheating changes it faster.

Read the guide
Technical line drawing of a tire on a building drum with layers being assembled.Tire construction & technology

Tire construction & technology

How a motorcycle tire is made: the process behind the sidewall

Mixing, calendering, building and curing decide the structure. Inspection catches some defects; it cannot catch everything.

Read the guide

02 Sizes

Tire sizes & compatibility

Width, aspect ratio, rim diameter, clearance, conversions and the common 17-inch and scooter sizes.

20 guides

Technical line drawing of a tire with a dimension line across the tread and a label panel listing a metric size code.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire size calculator: the arithmetic behind the code

The code gives three numbers and one construction letter. Turning them into a diameter, a circumference and a gearing change takes a calculator and five minutes.

Read the guide
Technical line drawing of a tire seen head-on with a dimension line across the widest point of the sidewall.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire width: nominal millimetres, measured reality

A 120 is not 120 millimetres of tread, and two tires with the same number can measure differently on the same rim. Width sets the shape of the contact patch.

Read the guide
Technical line drawing of a tire in cross-section with a percentage label on the sidewall height.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire aspect ratio: how tall the sidewall really is

The second number is a ratio, not a measurement. Two tires with the same aspect ratio can have different sidewall heights because their widths differ.

Read the guide
Technical line drawing of a wheel with the tire removed and a dimension line across the bead seat.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle rim diameter: the inch figure the bead sits on

The last number in a size code is not the outside of the wheel. It is the bead seat diameter, and it has to match the tire's bead exactly.

Read the guide
Technical line drawing of a motorcycle in side view with load arrows above the front and rear wheels.Tire sizes & compatibility

Tire sizes & compatibility

Front and rear motorcycle tire sizes: two different jobs

The front steers and takes most of the braking load. The rear takes the drive and the passenger. The size codes reflect that division of labour.

Read the guide
Technical line drawing comparing two tire cross-sections, the larger one close to a fender line.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire upsizing: the costs behind the bigger number

A bigger size is two changes at once, width and diameter, and each has its own consequences. Work them out separately before ordering.

Read the guide
Technical line drawing comparing a narrow and a wide tire cross-section with a load arrow above each.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire downsizing: what the smaller size gives up

A narrower tire is not a lighter version of the same thing. It carries less air, heats faster and changes the shape of the footprint.

Read the guide
Technical line drawing of a rim in section with a caliper across the bead flanges and a tire outline above.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle rim width and tire fit: the limit before the size code

The tire has an approved rim range, and a rim outside it changes the tread shape even when the bead holds air.

Read the guide
Technical line drawing of a rear wheel with dimension arrows between the tire, swingarm, chain and fender.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire clearance: what to measure before the wheel goes back

A tire has to clear more than the fender. The chain, the stand, the hugger and the brake caliper all move relative to it.

Read the guide
Technical line drawing of three tire sidewalls labelled with a metric, an inch and an alpha size code.Tire sizes & compatibility

Tire sizes & compatibility

Motorcycle tire size conversion: three codes, one interface

Metric, inch and alpha markings describe the same bead seat with different conventions. Conversion gets you close; the maker's data gets you correct.

Read the guide
Technical line drawing of a small scooter wheel with a dimension line across the rim and sidewall.Tire sizes & compatibility

Tire sizes & compatibility

Scooter tire sizes: what the small-wheel numbers control

On a 14-inch wheel the sidewall carries a large share of the total diameter, so a size change moves ride height, gearing and load margin at the same time.

Read the guide
Technical line drawing of a sportbike wheel with a dimension line across the tire and a label panel for size and load.Tire sizes & compatibility

Tire sizes & compatibility

Sportbike tire sizes: the rear is a ride-height adjustment

A 17-inch rear changes the attitude of the whole bike. Ten millimetres of sidewall reaches the steering head as a change in rake and trail.

Read the guide
Technical line drawing of an adventure wheel with a knobbly tread profile and a dimension line across the rim.Tire sizes & compatibility

Tire sizes & compatibility

Adventure tire sizes: two wheels built for different jobs

A taller front rolls over edges; a wider rear puts down drive. The size pair records which compromise the manufacturer chose.

Read the guide
Technical line drawing of a cruiser wheel with a tall sidewall and a dimension line across the rim.Tire sizes & compatibility

Tire sizes & compatibility

Cruiser tire sizes: two numbering systems on one motorcycle

Inch codes and metric codes describe similar envelopes without being interchangeable. The rim and the manual decide which one belongs on the wheel.

Read the guide
Technical line drawing of an underbone wheel with a narrow rim and a dimension line across the tire.Tire sizes & compatibility

Tire sizes & compatibility

Underbone tire sizes: narrow rims and tall sidewalls

The rear is taller than the front on purpose. On a 1.60 inch rim, ten millimetres of width is a bigger change than it sounds.

Read the guide
Technical line drawing of a narrow 17-inch wheel with a dimension line across the tire section.Tire sizes & compatibility

Tire sizes & compatibility

110/70-17: a narrow 17-inch size read from the numbers

The code fixes the rim window, the load ceiling and the clearance. The motorcycle manual decides whether the size belongs on your bike.

Read the guide
Technical line drawing of a 17-inch front wheel with a dimension line across the tire section and rim.Tire sizes & compatibility

Tire sizes & compatibility

120/70-17: the size that steers most 17-inch fronts

The front carries the steering load at one contact patch, so its height and profile change feel more than the rear's width changes grip.

Read the guide
Technical line drawing of a 17-inch rear wheel with a dimension line across the tire and rim.Tire sizes & compatibility

Tire sizes & compatibility

130/70-17: a rear-leaning size with a gearing effect

Fourteen millimetres of diameter is a gearing change on a small engine. Confirm position, load index and rim before ordering.

Read the guide
Technical line drawing of a 14-inch scooter wheel with a dimension line across the tire and rim.Tire sizes & compatibility

Tire sizes & compatibility

90/90-14: a tall sidewall on a small scooter wheel

A 90 percent sidewall is the cushion that keeps a pothole away from the rim. Check rim width before choosing a wider alternative.

Read the guide
Technical line drawing of a 14-inch scooter wheel with a wider tire section and a dimension line.Tire sizes & compatibility

Tire sizes & compatibility

100/80-14: a wider 14-inch size with the same diameter

Ten millimetres more tread and almost no change in rolling radius. What moves is the rim requirement and the shape of the contact patch.

Read the guide

03 Performance

Tire performance & riding conditions

Grip, warm-up, pressure, rain, heat, commuting, highway, mountains, gravel and noise.

20 guides

Technical line drawing of a motorcycle tire contact patch against a textured road surface, with load arrows.Tire performance & riding conditions

Tire performance & riding conditions

Motorcycle tire grip: what the contact patch can actually hold

Rubber holds a road through two effects that behave differently on a cold morning, a hot afternoon and a dirty junction.

Read the guide
Technical line drawing of a tire rolling through a water film, with grooves shown carrying water outward.Tire performance & riding conditions

Tire performance & riding conditions

Motorcycle tire wet grip: clearing water faster than it arrives

A wet tire is a pump. When the pump cannot keep up, the rubber stops touching the road and no compound can help.

Read the guide
Technical line drawing of a tire on coarse asphalt, with an enlarged view of rubber deforming around aggregate.Tire performance & riding conditions

Tire performance & riding conditions

Dry grip: why a hot road is not automatically a grippy one

With no water to clear, the tread sits on stone. What happens next is decided by texture, temperature and the way the bike loads the edge.

Read the guide
Technical line drawing of a tire with heat arrows at the tread and a cooler rim and bead area.Tire performance & riding conditions

Tire performance & riding conditions

Tire warm-up: heat is generated, not granted

The tread warms first and the bead last. That order explains why a tire can feel ready before it is.

Read the guide
Technical line drawing of two tire profiles side by side, one crowned and one flattened by low pressure.Tire performance & riding conditions

Tire performance & riding conditions

Tire pressure and handling: the same tire, three different bikes

A few tenths of a bar change the shape of the patch, the stiffness of the casing and the way the bike answers the bars.

Read the guide
Technical line drawing of a tire sidewall deflecting under load, with arrows showing energy lost as heat.Tire performance & riding conditions

Tire performance & riding conditions

Tire pressure and fuel use: a small effect with a hard limit

Rolling resistance is a tax paid in rubber. Pressure changes the rate, but not enough to justify a tire that no longer grips.

Read the guide
Technical line drawing of a motorcycle with two riders, showing load arrows concentrated at the rear wheel.Tire performance & riding conditions

Tire performance & riding conditions

Tire pressure with a passenger: the rear does most of the extra work

A pillion adds mass behind the rear axle. The casing deflects further, runs hotter and needs the figure the manual gives for two-up use.

Read the guide
Technical line drawing of a motorcycle with panniers and a top box, load arrows over the rear wheel.Tire performance & riding conditions

Tire performance & riding conditions

Tire pressure with luggage: weight, leverage and the rear axle

A top box asks more of the rear tire than the same mass in a tank bag, because height and distance from the axle change the load.

Read the guide
Technical line drawing of a tire in deep water, with groove channels discharging water to both sides.Tire performance & riding conditions

Tire performance & riding conditions

Tires for heavy rain: what a downpour asks of rubber

In heavy rain the tire is a pump working against the road. Depth, pattern, compound temperature and visibility decide the margin.

Read the guide
Technical line drawing of a tire on sunlit asphalt, with heat arrows from the road and the sun.Tire performance & riding conditions

Tire performance & riding conditions

Hot weather: when the road is hotter than the air

Sun, surface and deflection all add heat. The pressure rises, the compound softens and the tire ages faster than it does in cool months.

Read the guide
Technical line drawing of a treaded tire with a highlighted centre band and a sidewall impact zone.Tire performance & riding conditions

Tire performance & riding conditions

Tires for city commuting: the tire rarely gets warm, and that changes everything

A commuter tire works at ambient temperature, wears one narrow band and meets a kerb every few hundred metres. Those three conditions decide the compound.

Read the guide
Technical line drawing of a tire with flex lines on the sidewall and a temperature gradient arrow.Tire performance & riding conditions

Tire performance & riding conditions

Tires for highway riding: steady speed is the hardest thing a casing does

At a constant speed the tread barely moves and the sidewall works continuously. Heat balance, load and wear shape decide the outcome.

Read the guide
Technical line drawing of a tire leaning, with shoulder temperature markers and a gradient arrow.Tire performance & riding conditions

Tire performance & riding conditions

Tires for mountain roads: short bursts of heat, long transfers of wear

A pass is a sequence of shoulder loads followed by cooling straights. The front takes the braking and the rear pays for the ride home.

Read the guide
Technical line drawing of a tire on a loose surface, with stones displaced under the tread blocks.Tire performance & riding conditions

Tire performance & riding conditions

Tires for gravel roads: the surface moves, so the tread has to find the base

On loose material the tire pushes stone aside instead of keying into it. Float, block edges and sidewall strength are the three levers.

Read the guide
Technical line drawing of a tire on a grass and rut surface, with the sidewall and rim marked.Tire performance & riding conditions

Tire performance & riding conditions

Tires for light off-road: low speed changes which part of the tire matters

Fire roads, grass and shallow mud never warm a tire. Grip comes from tread shape and casing flex, and the rim is what pays for a mistake.

Read the guide
Technical line drawing of a loaded touring bike with panniers, showing rear tire load arrows.Tire performance & riding conditions

Tire performance & riding conditions

Tires for long-distance touring: the load case decides the tire, not the road

A loaded bike runs at temperature for hours. Load index, wear shape and wet margin matter more than peak dry grip.

Read the guide
Technical line drawing of a small scooter wheel with load arrows at the rear and a pothole impact.Tire performance & riding conditions

Tire performance & riding conditions

Tires for scooters: a small wheel does more work per kilometre

Ten and fourteen inch wheels accumulate flex cycles quickly, and the rear carries most of the load. Pressure and rim inspection follow from that.

Read the guide
Technical line drawing of a tire at full lean with heat markers on the shoulder blocks.Tire performance & riding conditions

Tire performance & riding conditions

Tires for sportbikes: the shoulder has a temperature window, not a rating

A sport tire is designed to work hot at the edge of the tread. Everything it gives up follows from that one decision.

Read the guide
Technical line drawing of an adventure tire with tall shoulder blocks and a load arrow at the rear.Tire performance & riding conditions

Tire performance & riding conditions

Tires for adventure bikes: the ratio is a design intent, not a test result

An 80/20 label tells you where the maker placed the compromise. The pattern and the casing tell you what that placement actually costs.

Read the guide
Technical line drawing of a tire with air pulses at the groove edges and resonance rings on the casing.Tire performance & riding conditions

Tire performance & riding conditions

Motorcycle tire noise: air, blocks and resonance, in that order

Three mechanisms produce the sound, and only some of them respond to anything a rider can adjust.

Read the guide

04 Wear

Tire wear & troubleshooting

Cupping, flat spots, cracking, bulges, punctures, leaks, vibration and replacement signs.

20 guides

Technical line drawing of a worn motorcycle tire with a flat centre strip and wear markers.Tire wear & troubleshooting

Tire wear & troubleshooting

Centre wear: the flat strip is a pressure and mileage record

A worn centre is not automatically abuse. It is the shape of the life the tire has lived, and it changes steering before the tread is gone.

Read the guide
Technical line drawing of a motorcycle tire with worn shoulders and a marked tread profile.Tire wear & troubleshooting

Tire wear & troubleshooting

Shoulder wear: the edge tells you how the bike is loaded at lean

Shoulder wear is not just 'sporty riding'. Pressure, rim width, suspension and compound all decide how the edge of the tread works.

Read the guide
Technical line drawing of a front tire with scalloped tread wear and wear markers.Tire wear & troubleshooting

Tire wear & troubleshooting

Cupping: the scalloped wear that points at damping

Cupping is a series of diagonal scoops, usually on the front. It is a dynamic problem, not a rubber problem.

Read the guide
Technical line drawing of a motorcycle tire with a flattened tread area and measurement marks.Tire wear & troubleshooting

Tire wear & troubleshooting

Flat spots: one is a skid, the other is a parking habit

A brake flat spot is abrasion. A storage flat spot is deformation. They look similar and need different responses.

Read the guide
Technical line drawing of a tire sidewall with crack lines and an inspection marker.Tire wear & troubleshooting

Tire wear & troubleshooting

Tire cracking: separate surface crazing from a structural crack

Small cracks in the sidewall are often cosmetic. A crack that reaches cord, a groove crack or a crack that grows is not.

Read the guide
Technical line drawing of a tire sidewall with a cut and a marked inspection area.Tire wear & troubleshooting

Tire wear & troubleshooting

Sidewall damage: the sidewall is structure, not trim

A sidewall cut cannot be patched like a tread puncture. If the cord is exposed or the bead is hurt, the tire is finished.

Read the guide
Technical line drawing of a tire with a sidewall bulge and a marked failure area.Tire wear & troubleshooting

Tire wear & troubleshooting

Tire bulges: a structural failure you can see

A bulge means the casing has lost local support. The tire can still hold air and still fail without warning.

Read the guide
Technical line drawing of a tire tread with a puncture and a repair zone marked.Tire wear & troubleshooting

Tire wear & troubleshooting

Puncture assessment: location decides more than size

A small nail in the centre tread may be repairable. The same nail in the shoulder is not.

Read the guide
Technical line drawing of a wheel with soapy water test points at bead and valve.Tire wear & troubleshooting

Tire wear & troubleshooting

Slow air leaks: find the path before you add air again

A tire that loses a few psi a week is telling you something. Topping it up hides the cause.

Read the guide
Technical line drawing of a wheel with a valve and pressure gauge check point.Tire wear & troubleshooting

Tire wear & troubleshooting

Valve leaks: the smallest part causes the slowest, most ignored loss

A valve is a sealed component with a rubber base and a spring-loaded core. Both can fail quietly.

Read the guide
Technical line drawing of a wheel rim with the bead seat and valve marked.Tire wear & troubleshooting

Tire wear & troubleshooting

Bead leaks: the seal lives on a clean, straight rim

A bead that leaks is usually not a bad tire. It is a rim seat that cannot hold the bead, or a bead that was damaged going on.

Read the guide
Technical line drawing of a wheel with vibration arcs and balance marks.Tire wear & troubleshooting

Tire wear & troubleshooting

Vibration diagnosis: speed and load narrow the cause

A vibration that appears at 60 km/h is not the same as one that appears under braking or only when loaded.

Read the guide
Technical line drawing of a front wheel with a wobble arc and steering axis.Tire wear & troubleshooting

Tire wear & troubleshooting

Wobble: the front end is a system, and the tire is one part

A wobble can start at the tire and be amplified by the steering head, the forks and the rider's grip.

Read the guide
Technical line drawing of a stored tire with sunlight and temperature markers.Tire wear & troubleshooting

Tire wear & troubleshooting

Tire aging: the calendar is only one input

Heat, sunlight and ozone age rubber faster than time. A tire can be young and hard, or old and serviceable.

Read the guide
Technical line drawing of a tire with multiple inspection markers and a wear scale.Tire wear & troubleshooting

Tire wear & troubleshooting

Replacement warning signs: the tire tells you before it fails

Some signs are maintenance. Some are stop-now. The difference is whether the structure is still intact.

Read the guide
Technical line drawing of a tire with several labelled wear zones.Tire wear & troubleshooting

Tire wear & troubleshooting

Uneven wear: the pattern is a diagnosis, not a defect

A tire wears where it is loaded. The shape of the wear tells you how the bike is set up and how it is ridden.

Read the guide
Technical line drawing of a tire with a wavy tread edge and damping arrows.Tire wear & troubleshooting

Tire wear & troubleshooting

Scalloping: the wavy edge that follows the tread blocks

Scalloping is wear that follows the pattern. It is usually a sign that the tire is moving more than the damping can control.

Read the guide
Technical line drawing of a tire with a pressure gauge and overnight temperature arrows.Tire wear & troubleshooting

Tire wear & troubleshooting

Overnight pressure loss: temperature first, then the seal

A few psi on a cold morning can be normal. A tire that is flat by morning is not.

Read the guide
Technical line drawing of a tire tread with a nail, cut and impact mark.Tire wear & troubleshooting

Tire wear & troubleshooting

Road hazard damage: the object is only half the injury

A nail is obvious. The pinch damage from the pothole that hid it is not.

Read the guide
Technical line drawing of a tire sidewall with a measured cut and cord layer.Tire wear & troubleshooting

Tire wear & troubleshooting

Sidewall cut assessment: depth, cord and location

A sidewall cut is a structural injury until proven otherwise. The three questions are depth, cord and location.

Read the guide

07 Maintenance

Tire maintenance & storage

Pressure checks, gauges, valves, cleaning, storage, sunlight, chemicals and inspection routines.

10 guides

Technical line drawing of a wheel with a pressure gauge and a cold-check label.Tire maintenance & storage

Tire maintenance & storage

Cold pressure: the only figure that compares to the label

A tire that has been ridden is already above its cold pressure. Setting it hot hides a low start.

Read the guide
Technical line drawing of a pressure gauge dial and a valve chuck.Tire maintenance & storage

Tire maintenance & storage

Pressure gauge accuracy: a wrong gauge makes every other check useless

A gauge that reads 3 psi high will keep your tires under-inflated for their whole life.

Read the guide
Technical line drawing of a tire with a pressure gauge and warning markers.Tire maintenance & storage

Tire maintenance & storage

Inflation mistakes: small habits, large consequences

Most pressure problems are not exotic. They are the same five habits repeated.

Read the guide
Technical line drawing of a tire valve with gas molecules and a pressure gauge.Tire maintenance & storage

Tire maintenance & storage

Nitrogen vs air: a small difference, sold as a big one

Nitrogen is drier and leaks slightly more slowly through rubber. It does not remove the need to check pressure.

Read the guide
Technical line drawing of a valve with a cap and dirt particles excluded.Tire maintenance & storage

Tire maintenance & storage

Valve caps: a secondary seal and a dirt barrier

The cap is not decoration. It keeps grit out of the core and backs up the seal.

Read the guide
Technical line drawing of a rim with a valve stem and seal in section.Tire maintenance & storage

Tire maintenance & storage

Valve stem replacement: cheap part, awkward timing

The best time to replace a valve is when the tire is off. Waiting until it leaks costs a second dismount.

Read the guide
Technical line drawing of a tire being cleaned with a brush and water.Tire maintenance & storage

Tire maintenance & storage

Tire cleaning: mild is better than strong

Rubber does not need solvents. It needs water, a little soap and a brush that will not cut.

Read the guide
Technical line drawing of a tire with a dressing applicator and a warning mark on the tread.Tire maintenance & storage

Tire maintenance & storage

Tire dressing: the shine can be slippery

A dressing that makes the sidewall look wet can make the tread and the brakes dangerous.

Read the guide
Technical line drawing of a stored tire with a thermometer and sun symbol.Tire maintenance & storage

Tire maintenance & storage

Storage temperature: heat ages rubber faster than cold

A tire stored in a hot shed can age faster in a year than one stored cool for five.

Read the guide
Technical line drawing of a stored tire with humidity droplets and a corrosion mark.Tire maintenance & storage

Tire maintenance & storage

Storage humidity: damp air attacks the rim before the rubber

A tire stored in a damp shed can have a perfectly good tread and a corroded bead seat.

Read the guide