Rubber itself is fairly resistant to humidity, but a wheel is not. Moisture in the air condenses on the rim, corrodes the bead seat and can reach the casing through a damaged liner or a loose bead. Mould can grow on a damp tire and leave a slippery film. The practical response is to store the wheel dry, keep it off a damp floor and inspect the bead area before fitting a tire.
Humidity effects
| Area | Effect | Action |
|---|---|---|
| Rim bead seat | Corrosion | Clean, inspect |
| Valve | Corrosion | Replace if aged |
| Tire surface | Mould film | Clean and dry |
| Liner | Moisture | Dry, inspect |
| Store floor | Damp | Use a rack |
| Sealed bag | Trapped moisture | Dry before sealing |
Condensation
Temperature changes cause moisture to condense on metal and rubber. A wheel moved from a cold store to a warm room can sweat. Repeated condensation accelerates corrosion at the bead seat and the valve.
Let the wheel reach room temperature before opening a sealed bag or mounting it. Wipe off any condensation.
Rim corrosion
A corroded bead seat can prevent a tubeless tire from sealing. The corrosion is often hidden under the tire and only appears when it is removed. Inspect the rim whenever a tire is changed.
Clean superficial corrosion and assess the metal. Deep pitting or a crack means the wheel should be repaired or replaced.
Mould and film
Mould can grow on a tire stored in a damp, dark place. It is usually a surface issue, but it can leave a slippery film and make inspection harder.
Clean the tire with mild soap and water, dry it thoroughly and store it in a drier place. Do not use a dressing to cover mould.
Dry storage
Store tires in a dry, ventilated space, off a damp floor. A sealed bag can protect a tire from dirt but can trap moisture if the tire is not dry. Use a breathable cover if condensation is a risk.
Keep the store ventilated. A closed, damp shed is worse than a cool, dry garage.
Before fitting
Inspect the bead, the rim and the inside of the tire. Look for corrosion, mould, water and a damaged liner. A tire that has been stored damp should be dried and inspected before mounting.
If the rim is corroded, clean and assess it before fitting a new tire. A new tire cannot seal against a rough, corroded seat.
Checklist
- Store tires dry and off the floor.
- Keep the store ventilated.
- Let cold wheels reach room temperature.
- Clean and dry a damp tire.
- Inspect the bead and rim before fitting.
- Do not seal a wet tire in a bag.
Questions
Does humidity damage tires?
It mainly attacks the rim and can leave mould on the rubber. The tire itself is fairly resistant, but a corroded bead seat can cause a leak.
Can I store tires in a damp basement?
Not ideal. Use a dry, ventilated space and keep the wheels off the floor. Inspect the rims before fitting.
How do I remove mould from a tire?
Clean with mild soap and water, rinse and dry thoroughly. Store it in a drier place.
Should I bag stored tires?
A breathable cover is safer if condensation is possible. Seal only a completely dry tire.