Tire pressure is specified cold: before the tire has been ridden or warmed by the sun. As the tire rolls, the air heats and the pressure rises, often by around 10 percent. If you check a hot tire and bleed it down to the label figure, you have removed the cold pressure the tire actually needs. The result is under-inflation, more heat and faster wear. The routine is simple: check before the first ride, at the same temperature, with a gauge you trust.

Pressure check conditions

ConditionCold?Use label?
Before first rideYesYes
After a rideNoNo, do not bleed
In direct sunNot trulyMove to shade first
After a short rideNoWait or note the rise
Cold morningYesYes
After inflatingYes, if coldRecheck

What cold means

Cold means the tire is at ambient temperature and has not been ridden for a few hours. A tire that has been standing in direct sun is not cold, even if it has not moved. A tire that has just been ridden is not cold, even if the ride was short.

The label figure is a cold figure. If the ambient temperature changes, the pressure changes too. A tire set in a hot afternoon can read low the next morning without leaking.

Why hot pressure rises

Flexing the tire converts energy into heat, and the air inside expands. A rise of about 10 percent from cold is normal on the road; more on a track or in hot weather. That rise is designed in, not a fault.

Bleeding a hot tire to the cold figure leaves it under-inflated when it cools. The next ride starts low, generates more heat and can overheat the casing. Set the pressure cold and leave the hot reading alone.

Using a gauge

Use a gauge with a scale that matches the pressure range you need. A gauge that reads to 100 psi is less precise at 25 psi than one with a 0-40 psi scale. Check the gauge against a known reference periodically.

Push the chuck fully onto the valve, read the gauge without twisting, and replace the cap. A hiss after removal means the valve core is not sealing.

The label and the load

The vehicle label or manual gives the cold pressure for solo and, where applicable, two-up and luggage. The sidewall maximum is not the setting. Use the label and adjust only within the manufacturer's guidance.

If you cannot find the label, use the manufacturer's documentation for that model and market. Do not guess from a similar bike.

A routine that works

Check both tires before the first ride of the day, at least weekly and before a long trip. Record the readings. A slow loss becomes visible over a few checks.

If a tire is consistently low, find the cause rather than topping it up. A valve, bead or puncture leak will not fix itself.

Checklist

  • Check before the first ride of the day.
  • Move the bike out of direct sun first.
  • Use a gauge matched to the pressure range.
  • Set to the vehicle label, not the sidewall maximum.
  • Do not bleed a hot tire.
  • Record readings to spot a slow leak.

Questions

Should I check pressure hot or cold?

Cold. The label figure is cold. A hot reading is higher and should not be bled down to the label.

How much does pressure rise when hot?

Roughly 10 percent on the road, more on a track or in hot weather. The rise is normal.

Does sunlight affect pressure?

Yes. Direct sun heats the tire and raises pressure. Move the bike to shade and let it cool before setting the cold figure.

How often should I check?

At least weekly and before every long trip, plus before the first ride after the bike has been parked.

Go deeper