Tire pressure is only as good as the gauge used to set it. A gauge can be inaccurate, imprecise or simply hard to read. The practical issues are scale, resolution, repeatability and the seal at the valve. A gauge that reads to 100 psi in 5 psi steps is not useful for a 25 psi motorcycle tire. A digital gauge can be precise but needs a good battery and a steady chuck. Checking the gauge against a reference is part of maintaining it.
Gauge selection
| Feature | Good | Avoid |
|---|---|---|
| Range | 0-60 psi | 0-200 psi |
| Resolution | 1 psi or better | 5 psi steps |
| Accuracy | Stated figure | No specification |
| Chuck | Sealed, firm | Loose, hissing |
| Power | Replaceable battery | Sealed, unknown |
| Repeatability | Same reading 3x | Drifts |
Scale and resolution
Choose a gauge whose range is close to the pressures you use. A 0-40 psi gauge resolves 1 psi more easily than a 0-100 psi gauge. For a bike that uses 25-36 psi, a 0-60 psi gauge is a reasonable compromise.
Resolution is not the same as accuracy. A digital gauge that displays 0.1 psi may still be 2 psi off. Look for a stated accuracy figure, not just a fine display.
Repeatability
A gauge should give the same reading on repeated checks. If it drifts, the internal mechanism or the seal is suspect. Test by taking three readings in a row without adding air.
A leaking chuck loses air as you read, which can make the gauge read low. Press it on firmly and listen for a hiss.
Digital versus dial
Digital gauges are easy to read and often have a hold function. They depend on a battery and can be damaged by drops. Dial gauges are mechanical and can be robust, but the needle can stick or the glass can fog.
Either type can be accurate. The important thing is to use one gauge consistently and to check it against a reference.
Checking against a reference
Compare the gauge with a known-good gauge, a workshop gauge or a calibrated reference. If the difference is consistent, you can note the offset, but replacing the gauge is better.
Check the gauge after a drop or a long period of disuse. A gauge that has been in a hot toolbox for years may not be reliable.
Using it well
Check cold, in shade, with the valve accessible. Read the gauge without twisting the chuck. Replace the valve cap. If the reading is low, add air in small increments and recheck.
Do not rely on a forecourt inflator gauge alone. It may be accurate, but it is often abused. Use your own gauge to confirm.
Checklist
- Use a gauge with a range close to your pressures.
- Take three readings to check repeatability.
- Listen for a hiss at the chuck.
- Compare with a known-good gauge.
- Replace a dropped or drifting gauge.
- Confirm forecourt inflator readings with your own gauge.
Questions
Are digital gauges more accurate?
Not necessarily. Accuracy depends on the sensor and calibration, not the display. A good dial gauge can be as accurate as a digital one.
How often should a gauge be checked?
Periodically, and after a drop or a long period of disuse. Compare it with a known-good reference.
Why does my gauge read differently each time?
The chuck may be leaking, the valve core may be sticking, or the gauge may be drifting. Check the seal and the repeatability.
Can I use a car gauge?
Yes, if its range and resolution suit motorcycle pressures. A gauge designed for 30-40 psi is better than one for 80 psi.