Rubber compounds change with oxygen, ozone, ultraviolet light and heat. The changes are slow in a cool, dark, dry store and fast on a sunny veranda. A tire's date code is useful, but it is not a shelf-life certificate. The practical questions are whether the surface is cracked, whether the rubber has hardened, whether the casing is deformed and how the tire will be used. A low-speed scooter tire and a highway touring tire do not need the same margin.
Aging factors
| Factor | Effect | Control |
|---|---|---|
| Oxygen | Oxidation | Store sealed, dark |
| Ozone | Surface cracks | Avoid motors, solvents |
| UV | Surface degradation | Cover, shade |
| Heat | Accelerated aging | Cool store |
| Load | Deformation | Lift or move bike |
| Chemicals | Rubber damage | Avoid contact |
What ages rubber
Oxygen and ozone attack the polymer chains, especially where the rubber is stretched. Sunlight adds ultraviolet energy. Heat accelerates every reaction. Load and flexing add mechanical stress.
A tire stored flat, inflated, in a dark place ages more slowly than one stored deflated in the sun. A tire that has been used and heated repeatedly may age faster than an unused one.
Storage conditions
Store tires clean, dry, out of direct sunlight and away from ozone sources such as electric motors, welding equipment and solvents. Keep them away from sharp objects and from prolonged contact with oil or fuel.
For a bike in storage, keep the tires inflated to the recommended pressure, lift them off the ground if possible, or move the bike periodically to change the contact point. Cover the tires if the bike is outside, but use a breathable cover.
Inspecting an old tire
Look for sidewall cracking, a hard or shiny surface, a deformed bead and tread cracks. Feel the rubber: a tire that feels brittle or slick is suspect. Check the date code and the wear indicators.
A tire with shallow surface crazing but sound rubber may be serviceable for low-speed use. A tire with cracks to cord, a bulge, a deformed bead or deep tread cracks should be replaced.
Age and use
A tire that will be used at highway speed or with a heavy load has less margin for aging. A tire that will be used at low speed on a scooter has more. The decision should reflect the duty, not only the date.
If you are unsure, replace it. A tire is a relatively small cost compared with the consequences of a failure at speed.
Preventing premature aging
Keep pressure correct, avoid harsh chemicals, park out of the sun and clean the tires regularly. Do not use a dressing that leaves a greasy film on the tread. Check the sidewalls at every pressure check.
When buying a new tire, ask for the date code and inspect the sidewalls before it is mounted. A tire that has been stored badly may already be aging.
Checklist
- Check the date code and sidewalls.
- Store out of direct sun and away from ozone sources.
- Keep tires inflated in storage.
- Lift the tires or move the bike periodically.
- Inspect for cracks, hardening and deformation.
- Replace a tire with cord cracks or a deformed bead.
Questions
Does a tire expire?
There is no single universal expiry date. Aging depends on storage, heat, sunlight and use. Inspect the tire and follow the manufacturer's guidance.
Can I use a tire that has been stored for years?
Only after a careful inspection. A tire stored cool, dark and inflated may be serviceable; one stored in the sun may be hardened and cracked. For highway use, a fresher tire is safer.
Should I deflate tires for storage?
No. Keep them inflated to the recommended pressure to maintain shape and seal. Deflating can deform the casing.
Does tire dressing protect rubber?
Some dressings may offer limited UV protection, but many leave a slippery film. Clean the tire and keep it out of the sun instead of relying on a dressing.