A flat spot is a localised area of the tread that is lower or flatter than the rest. The two common causes are a locked wheel and long storage under load. A skid removes rubber and often leaves a rough, abraded patch; storage compresses the casing and can leave a smooth depression that may partly recover after the tire warms. The first is permanent damage, the second is sometimes reversible, but neither should be ignored if it causes vibration.
Flat spot types
| Type | Surface | Recovery |
|---|---|---|
| Brake skid | Rough, glazed | None, replace if deep |
| Storage | Smooth, broad | May fade after heat |
| Impact | Localised bulge or flat | Replace |
| Manufacturing | Irregular runout | Warranty inspection |
Skid flat spots
A locked front or rear wheel under braking abrades a patch of tread flat. The harder the stop and the longer the slide, the deeper the spot. The patch can be rough or glazed, and the casing underneath may have been overheated.
A skid flat spot is not repairable. If the tire vibrates, the tread is at the wear indicator, or the spot is deep enough to feel, replace it. A shallow spot may be tolerable at low speed but will still be felt at highway speed.
Storage flat spots
A tire left in one position under load for months can deform. The depression is usually broad and smooth, and it may be more noticeable when the tire is cold. Some tires recover after a few kilometres of gentle riding and heat.
To reduce the risk, store the bike with the tires off the ground or move it periodically, keep the pressure at the recommended figure and avoid extreme heat. A storage flat spot that does not fade after a few rides is a reason to inspect and possibly replace.
Telling them apart
Look at the surface. A skid patch is usually rough, scuffed or glazed and may have a sharp edge. A storage depression is smooth and broad, with no abrasion. Measure the tread depth across the spot; a skid removes material, storage usually does not.
Check the date code and the sidewalls. A tire that has been stored flat may also have cracks or a hardened surface. If the tire is old, the flat spot is one more reason to replace it.
Vibration and handling
A flat spot creates a once-per-revolution vibration that rises with speed. It can feel like a wheel imbalance, but balancing will not remove it. It can also make the front end feel vague or cause a wobble at low speed.
Do not try to ride through a deep flat spot at high speed. The vibration can damage the bike and distract the rider. Replace the tire if the spot is significant.
Prevention
Avoid locking a wheel; use progressive braking and let the front tire roll. If the bike will be parked for months, lift the tires off the ground or move it regularly. Keep the pressure at the recommended figure and store it out of direct sun.
A tire that has been parked flat for a long time should be inspected before the first ride. Check pressure, look for cracks and feel for a depression.
Checklist
- Feel the tread for a localised low area.
- Check whether the surface is rough or smooth.
- Measure tread depth across the spot.
- Balance the wheel to rule out imbalance.
- Ride gently to see if a storage spot fades.
- Replace a deep skid spot or a persistent vibration.
Questions
Can a flat spot be repaired?
A storage depression may recover with heat and use. A skid flat spot is removed rubber and cannot be repaired. Replace the tire if it is deep or causes vibration.
How long can a bike sit before flat spots form?
It depends on load, pressure, temperature and the tire. Weeks can be enough for some tires; months are more likely. Lifting the tires or moving the bike reduces the risk.
Will a flat spot go away on its own?
A mild storage depression may fade after a few rides. A skid spot will not. If the vibration persists, replace the tire.
Is it safe to ride with a flat spot?
A mild spot may be tolerable at low speed. A deep spot or one that causes vibration at speed is not safe. Replace it.