A motorcycle tire sidewall carries more information than most riders ever read. The size code gives width, aspect ratio and rim diameter; the load index and speed rating give the approved duty; the construction letters say whether the casing is radial or bias; the DOT block carries a plant code and a date. There are also maximum-pressure figures, rim-width recommendations, ECE approval numbers and, on some tires, a direction arrow. None of it is decorative, and a mismatch between the sidewall and the vehicle plate is the first thing to resolve before fitting.

Sidewall fields and what they mean

MarkingExampleMeaning
Section width110Nominal width in mm
Aspect ratio70Sidewall height as % of width
ConstructionRRadial (dash or B often bias)
Rim diameter17Inches
Load index54Maximum load per tire (kg)
Speed symbolHMaximum speed category
Maximum pressure340 kPaTire ceiling, not bike setting
Date code3224Week 32 of 2024

The size line, left to right

A metric size such as 110/70 R 17 breaks into four parts. 110 is the nominal section width in millimetres. 70 is the aspect ratio, the sidewall height as a percentage of the width. R means radial construction; a bias tire may show a dash instead, or a letter such as B. 17 is the rim diameter in inches.

Older and small sizes use a different format. 3.50-10 means a nominal width of 3.50 inches on a 10-inch rim; 4.00-18 works the same way. A size like 130/90-16 combines a metric width with a bias casing. Do not convert between the two formats by arithmetic alone, because the nominal inch width and the metric width are measured differently.

Load index and speed rating

After the size comes the load index, a number that maps to a maximum load per tire in kilograms, then the speed symbol, a letter that maps to a maximum speed. In 110/70 R 17 54 H, 54 is the load index and H is the speed rating. The load index is not the weight of the bike; it is the maximum the tire is approved to carry when inflated to the pressure specified for that load.

The vehicle plate or manual gives the minimum load index and speed rating for the bike. Fitting a tire with a lower figure can be unsafe and may be illegal. Fitting a higher figure is not automatically better: a much stiffer tire can change the ride and the way the contact patch warms.

Construction, rim width and maximum pressure

Radial tires often show a belt description or a radial mark. Bias tires may show the number of plies, such as 4 PR, which is a rating rather than a literal ply count on every tire. Tubeless tires are marked TUBELESS; tube-type tires may say TUBE TYPE or carry an inner-tube size recommendation.

The maximum pressure line is the tire's ceiling, not the bike's recommendation. A tire may say 'maximum 340 kPa (49 psi)' while the motorcycle label says 200 kPa (29 psi) for solo use. Always set pressure from the vehicle label and treat the sidewall figure as a limit. The recommended rim width is also on the sidewall on many tires; a rim outside that range changes the tread profile.

DOT, ECE and date codes

In the United States, a DOT code identifies the manufacturer, plant, size and date. The last four digits are the week and year of production, so 3224 means week 32 of 2024. Before 2000 the code used three digits. In Europe, an ECE type-approval number and an E-mark may appear instead of, or alongside, the DOT code.

The date code is a manufacturing date, not a shelf life. A tire stored cool, dry and out of sunlight ages more slowly than one baking on a rack. A new-looking tire with an old date should be inspected for cracking and hardening before it is used, especially on a bike that will see highway speed.

Marks that are not specifications

Colour dots, paint stripes and chalk marks are factory aids. They can indicate the light point of the casing, a balance reference or a batch mark, and they are not a quality grade. A red dot near the bead is often used to align the tire's light point with the rim's heavy point during mounting, but the procedure is manufacturer-specific.

Marketing names, tread pattern names and 'sport', 'touring' or 'trail' labels are useful categories, not standards. They tell you what the maker intended, not what the tire will do on your bike. The size, load index, speed rating and date are the facts you can act on.

Checklist

  • Photograph the sidewall before removing a wheel so the size is not guessed later.
  • Compare load index and speed rating with the vehicle plate.
  • Confirm tubeless or tube-type before fitting.
  • Check the date code on both tires, not just the new one.
  • Set pressure from the vehicle label, never from the sidewall maximum.
  • Check the recommended rim width if the wheel is not original.

Questions

What does 54H mean on a tire?

54 is the load index, which maps to a maximum load per tire in kilograms. H is the speed symbol, which maps to a maximum speed category. Both must meet or exceed the vehicle manufacturer's requirement.

Is the four-digit date code the expiry date?

No. It is the production week and year. Tires age with heat, sunlight, ozone and load, so condition and storage matter more than the date alone. A very old tire should be inspected before use.

Why does the sidewall pressure differ from the manual?

The sidewall figure is the tire's maximum. The manual figure is the pressure the vehicle maker specifies for a given load. Use the manual figure and treat the sidewall as a ceiling.

Can I use a tube in a tubeless tire?

Only if the tire and rim manufacturer approve it, and usually only in an emergency. A tube in a tubeless tire can generate heat and change the bead seal. The correct repair is a proper tubeless repair or a replacement.

Go deeper