Road hazards damage tires in two ways. A sharp object makes a hole; an impact compresses the tire against the rim and damages the casing. The second is often invisible from outside and can produce a bulge days later. After any significant impact, inspect the tread, both sidewalls, the bead and the rim. A small central puncture may be repairable; a sidewall cut, a bulge or a bent rim is not.
Hazard damage guide
| Damage | Location | Action |
|---|---|---|
| Small nail hole | Centre tread | Internal patch if allowed |
| Cut | Tread | Inspect, replace if deep |
| Cut | Sidewall | Replace |
| Impact | Any | Inspect for bulge and rim |
| Bent rim | Flange | Repair or replace wheel |
| Cord visible | Any | Replace |
Sharp objects
Nails, screws, glass and metal fragments can lodge in the tread. A small, clean hole in the central tread may be repairable with an internal patch. A cut, a tear or a hole near the shoulder is a replacement.
Do not pull an object out at the roadside if the tire is holding air. It may be sealing the hole. Get to a safe place and assess.
Potholes and kerbs
An impact compresses the tire between the obstacle and the rim. The cord can break, the bead can deform and the rim can bend. The damage may not show immediately.
After a hard hit, stop and inspect. Look for a bulge, a cut, a wobble and a bent rim. Check the pressure. If anything is wrong, do not continue at speed.
Cuts and sidewall damage
A cut in the tread that does not reach cord may be cosmetic if the edges are clean. A cut in the sidewall is more serious because the sidewall flexes. If cord is visible, the tire is finished.
A flap of rubber should not be trimmed if it might be protecting a damaged area. Have a shop inspect it.
Repair limits
A repair must be within the manufacturer's limits and should be done from the inside. A plug is a temporary measure. A repaired tire should be monitored for pressure loss.
A tire with multiple punctures, a puncture near the shoulder, a sidewall injury or cord damage is not repairable. Replace it.
After the repair
Check pressure daily for the first week, then at the normal interval. Avoid high speed and heavy loads until you are confident. If the repair leaks or the tire vibrates, replace it.
Record the repair and the date. A repaired tire is still a compromised tire.
Checklist
- Stop safely after a hard impact.
- Inspect tread, sidewalls, bead and rim.
- Check pressure and look for a bulge.
- Do not remove an object that is sealing a hole.
- Use an internal patch for a permanent repair.
- Replace a tire with sidewall or cord damage.
Questions
Can a pothole damage a tire without a visible cut?
Yes. The impact can break cords internally and produce a bulge later. Inspect after any hard hit and monitor for vibration.
Is a plug enough for a road hazard puncture?
A plug is a temporary fix. A permanent repair requires dismounting and an internal patch within the manufacturer's limits.
Should I replace a tire after a kerb strike?
Inspect first. A scuff may be cosmetic; a bulge, a cut to cord or a bent rim is not. If in doubt, replace.
Can a bent rim be straightened?
Some alloy wheels can be repaired by a specialist, but a cracked or badly bent rim should be replaced. A repaired rim must still seal and run true.